Chevron conveyor belts are used primarily when the angle of incline becomes too steep for a smooth conventional conveyor belt. The belt is fitted with integrally moulded cleats which prevent the material from sliding backwards as would be the case with a smooth surface belt. Different cleat designs allow the carrying of many types of material, from bulk solids to unit loads.

● Application: There are open type and closed type, suitable for bulk or bagged materials such as powder and granule with incline less than 45 C.

● Technical Data of Rubber Cover:

Tensile Strength: ≥10Mpa

Elongation at Break: ≥350%

Adhesive strength between carcass: ≥6.0N/mm

Adhesive strength between cover and carcass: ≥3.0N/mm

Elasticity: ≥32%

Abrasion: ≤200mm3